Table of Contents
Advertisement
Auto Scan
The Auto Scan command allows you to set and enable Auto scan mode. Type
your command in the following format:
Command + Control + [Enter]
Command
scan
Control
all
pon
txx
For example, to auto scan all ports, type the following:
scan all [Enter]
For example, to set the scan's focus on each port for a duration of 15 seconds
before continuing on, type the following:
scan t15 [Enter]
Note: Each command string can be separated with a space.
Auto Scan Command
Auto scan all ports
Auto scan all ports with computers powered on
Sets the KVM focus duration when scanning, xx= 5, 10, 15,
60, 90 seconds
Example: t60
Chapter 6. RS-232 Operation
Description
Description
79
Advertisement
Table of Contents
