Method
Quick Access
Move the mouse to the top center of the
Toolbar
OSD to display the Quick Access Toolbar,
and then select from the Quick Access
Toolbar.
Note: Hardware Cursor Mode must be
enabled, see The OSD Menu, page 57.
Hotkey
Switch to a particular port to display the
computer in full screen. See The Hotkey
Setting Mode, page 48 for hotkey
instructions.
OSD Menu
In the OSD, click
Access Toolbar, go to Display >
Multiview Mode, and then select Single.
Note: You may need a password to
access the OSD Menu. For details, see
Password Protection, page 58.
Action
from the Quick
Chapter 3. Basic Operation
Description
35