System Settings - ATEN CM1284 User Manual

System Settings

The following settings are available in the OSD Menu. Default settings are
indicated in bold.
Setting
General
OSD Language
Pushbutton Lock
Logout Timeout
Active Beeper
Display B Status
Keyboard Language English / German /
Hardware Cursor
Options
English / Chinese TW /
Chinese CN /
Japanese, Korean /
French / German /
Italian / Russian
Enable / Disable
Never / 10s / 30s / 60s
/ 5 mins / 10 mins
Enable / Disable
Follow A / Port 1 / Port
2 / Port 3 / Port 4
Japanese / French
Enable / Disable
Chapter 5. OSD Operation
Description
Sets the language for the OSD Menu.
Locks or unlocks the Multi-View
TM
KVMP Switch's panel pushbuttons.
Sets how long the Multi-View KVMP
Switch waits after the last input or
RS-232 command before automatically
logging out from the OSD Menu or
closing an RS-232 session.
Enable this function for Multi-View
TM
KVMP Switch to sound a beep to
indicate and confirm user configuration.
This setting is supported by the
CM1284 only. Sets the video source of
the display connected to the HDMI
Console Port 2 on the CM1284.
Sets the language of the console
keyboard. For these options to be
available, make sure to enable
Keyboard Emulation in the OSD Menu.
Enable this function to allow the use of
console mouse to customize division
sizes, shift between divisions, and
display the Quick Access Toolbar. The
Channel Editor provides a way to
change display modes and other
settings with the mouse and an on-
screen control panel.
Note: Mouse Emulation must be
enabled for Hardware Cursor Mode to
work (see Mouse Emulation, page 62).
TM
59