Table of Contents
Advertisement
1. Important safety information regarding the placement of this
device is provided on page 107. Please review it before
proceeding.
2. To prevent damage to your installation from power surges or
static electricity. It is important that all connected devices are
properly grounded.
3. Make sure that the power to all devices connected to the
installation is turned off. You must unplug the power cords of
any computers that have the Keyboard Power On function.
Rack Mounting
For convenience and flexibility, the Multi-View KVMP
mounted on system racks. To rack mount a unit, do the following:
1. Remove the screws attached to the unit as shown in the diagram below:
Note: You can remove the screws on the front side panels or the back side
panels. The succeeding diagrams show the rack mounting steps for the
back panel.
Hardware Setup
Switch can be
TM
Front
Chapter 2
Back
13
Advertisement
Table of Contents
