How To Record/Playback Waveforms - Owon SDS5052E-V User Manual

5.Advanced User Guidebook
Figure 5-50: choose the .ota file
(3) Choose Recall output. And the tip "Read file successfully" will show on the interface.
Figure 5-51: Read file
Tips:
1. Normally the frequency, amplitude, and offset of the recalled wave are the same as the
wave being cut, but when the frequency, amplitude, and offset are set out of the limit
range, then AG generators would use the current parameter, which leads to the recalled
wave not totally the same as the cut wave.
2. The max data number of AG1022F ARB is 8192. When the wave cut from oscilloscope
contains data number more than 8192, AG1022 will compress data. On the contrary if the
data number is less than 8192, AG1022F will use linear interpolation.
3. The max data number of AG2052F ARB is 1000000. When the wave cut from
oscilloscope contains data number more than 1000000, AG2052F will compress data. On
the contrary if the data number is less than 1000000, AG2052F will use linear
interpolation.

How to Record/Playback Waveforms

Wave Record function can record the input current wave. You can set the interval between
recorded frames in the range of 1 ms - 1000 s.The max frame number reaches 1000,and
you can get better analysis effect with playback and storage function. The storage medium
57