Christie LWU620i User Manual page 58

Operating
PbyP (Picture by Picture) / PIP (Picture in Picture) (continued)
 PbyP / PIP SWAP function
Press the MY BUTTON assigned the PbyP / PIP SWAP (89). The position of
the area is exchanged without any setting change.
main sub
area area
NOTE
• For some signals, it may not be displayed correctly in the PbyP / PIP
mode, even if it can be displayed properly in the normal mode.
• PbyP/PinP is unavailable when MANUAL is selected in GEOMETRY
CORRECTION > EDGE BLENDING > MODE.
 Changing the size of main area in PbyP mode
Using ▲/▼ buttons on the remote control changes the size of main area in
PbyP mode.
main area
sub area
 Changing the position of sub area in PIP mode
1. Select PIP POSITION in INPUT MENU (73).
2. Using ▲/▼ buttons on the remote control changes the position of sub area
in PIP mode.
main area
sub area
LWU720i/LHD720i/LWU620i
User's Manual - Operating Guide
sub main
area area
PbyP mode
main area sub area
main area
sub area
main area
sub area
main area
main area
sub area
56
sub area
main area
PIP mode
sub area
main area
sub area
020-001279-01 Rev. 1 (10-2017)