Christie LWU620i User Manual page 34

Status Monitor
Displaying the condition of the projector (continued)
NOTE
• While the projector is searching an input signal in normal condition,
nothing is displayed on the 2nd line of the monitor.
• Displayed temperature might differ from actual peripheral temperature
because the displayed temperature is measured inside of the projector.
 In error state
The Status Monitor displays a warning of an error with
larger letters. Resolve the errors referring to the table
of the sections "Related messages" (116 ~ 118) and
"Regarding the indicator lamps" (119 ~ 123) when the
warning is displayed.
Warnings;
AIR (AIR FLOW): The internal temperature is rising.
Refer to the description of the message, "CHECK THE AIR FLOW" in the
table (117).
COLD: The interior portion may have become over cooled.
Refer to the LAMP and TEMP indicators alternatively blinking in the table
(122).
FILTR (FILTER): Clean the air filter.
Refer to the LAMP and TEMP indicators simultaneous blinking in the table
(121).
SHUTR: Shutter Error
Contact your dealer or service company.
SHIFT: Lens Shift Error
Contact your dealer or service company.
Errors;
COVER: The lamp cover has not been properly fixed.
Refer to the LAMP indicator blinking in the table (120).
FAN: The cooling fan is not operating.
Refer to the TEMP indicator blinking in the table (120).
LAMP: The lamp does not light.
Refer to the LAMP indicator lighting in the table (120).
TEMP: The projector's interior becomes over heated.
Refer to the TEMP indicator lighting in the table (121).
ACBLK: Refer to the LAMP indicator lighting in the table (120).
OTHER: Errors other than the above (121).
NOTE
• When one of the warnings of FAN, LAMP, COVER, TEMP is
displayed, the backlight blinks at the same time.
LWU720i/LHD720i/LWU620i
User's Manual - Operating Guide
32
C O E R
V
example
020-001279-01 Rev. 1 (10-2017)