Christie LWU620i User Manual page 44

Operating
Adjusting the lens (continued)
Lens memory
This projector is equipped with memory functions for the
lens adjustments (LENS SHIFT and LENS TYPE). Up
to three sets of adjustments can be stored.
To use the lens memory feature, press the LOAD, SAVE
or FUNCTION button while the LENS SHIFT dialog is
displayed. Then the LENS MEMORY dialog appears.
The current lens adjustments are displayed on the
"CURRENT" line. The adjustments already stored in the
lens memory are displayed on the lines of SAVE and
LOAD-1 to 3.
 SAVE:
To store the current lens adjustments, select one of the
"SAVE" options numbered 1 to 3 (number of the lens
memory) and press the ►or ENTER button.
Remember that the current data being stored
of a memory is lost by saving new data into the
memory.
 LOAD:
To recall stored adjustments, select one of the
"LOAD" options numbered 1 to 3 (number of the
lens memory) and press the ►or ENTER button.
Remember that the current adjusted condition is lost by loading data. If you want to
keep the current adjustment, save it before performing a LOAD function.
 CLEAR LENS MEMORY:
To clear the adjustment stored in a lens memory, select CLEAR LENS MEMORY
and press the ►or ENTER button. The CLEAR LENS MEMORY dialog is displayed.
Select the number of the lens memory to be cleared using the ▲/▼ buttons and
press the ►button. A message dialog is displayed for confirmation. Press the
►button again to clear the lens memory.
NOTE
• The projector may ignore the operation by buttons while moving the lens.
• You can perform the LOAD function using LENS MEMORY button.
LWU720i/LHD720i/LWU620i
User's Manual - Operating Guide
SHUTTER
42
FUNCTION
button
LENS MEMORY
button
020-001279-01 Rev. 1 (10-2017)