Christie LWU620i User Manual page 77

Item
GEOMETRY
CORRECTION
(continued)
LAMP & FILTER
(continued on next page)
LWU720i/LHD720i/LWU620i
User's Manual - Operating Guide
TEST PATTERNS
Select PATTERN with ▲/▼ buttons.
Displayed pattern [Off/1/2/3/4/5/6] can
be switched with ◄/► buttons.
PATTERN 1: Frame
PATTERN 2: Red Grid
PATTERN 3: Green Grid
PATTERN 4: Blue Grid
PATTERN 5: Vertical 9 steps
PATTERN 6: Horizontal 9 steps
OFF: Displays the input signal.
Selecting this item displays the LAMP
& FILTER menu.
Select an item using the ▲/▼ buttons,
and press the ► button or the ENTER
button on the remote control to
execute the item.
ECO MODE
Using the ▲/▼ buttons switches the Eco mode.
NORMAL ó ECO
• When the item other than NORMAL is selected, acoustic noise and
screen brightness are reduced.
LAMP HOURS
The lamp time is the usage time of the lamp, counted after the last
resetting. It is shown in the LAMP & FILTER menu.
Pressing the RESET button on the remote control or the ► button
of the projector displays a dialog.
To reset the lamp time, select the OK using the ► button.
CANCEL ð OK
• For the lamp replacement, see the section Replacing the lamp
109
( ).
• The lamp time can be checked also with the Status Monitor (
• The HDCR LiteLoc function does not work properly unless LAMP
HOURS is initialized when replacing a lamp.
Description
75
SETUP menu
31
).
020-001279-01 Rev. 1 (10-2017)