Christie LWU620i User Manual page 79

Item
PICTURE
POSITION
INSTALLATION
(continued on next page)
LWU720i/LHD720i/LWU620i
User's Manual - Operating Guide
Using the ▲/▼/◄/► cursor buttons selects the required picture
position.
The PICTURE POSITION is not changed if any of the following
cases apply.
・ There is no non-display area (black display or background display)
or it is not displayed on the screen.
• One of the following messages is displayed on the screen:
"NO INPUT IS DETECTED"
"SYNC IS OUT OF RANGE"
"INVALID SCAN FREQ."
• The BLANK or TEMPLATE function is selected.
Pressing the ►button displays the dialog for changing the
INSTALLATION setting.
FRONT / DESKTOP

REAR / DESKTOP

REAR / CEILING

FRONT / CEILING
Use the ▲/▼ buttons to select the required setting on the
INSTALLATION dialog, and press the ENTER button of the remote
control or the INPUT button of the projector to execute.
If TRANSITION DETECTOR is ON and the INSTALLATION status
is changed, the TRANSITION DETECTOR ON alarm (
displayed when the projector is restarted.
Description
77
SETUP menu
105
) is
020-001279-01 Rev. 1 (10-2017)