Christie LWU620i User Manual page 117

Caring for the cabinet and remote control
Incorrect care could have adverse influence such as discoloration, peeling paint,
etc.
1.
Turn the projector off, and unplug the power cord. Allow the projector to cool
sufficiently.
2.
After making sure that the projector is cool adequately, lightly wipe with gauze
or a soft cloth.
If the projector is extremely dirty, dip a soft cloth in water or a neutral cleaner
diluted in water, and wipe lightly after wringing well. Then, wipe lightly with a
soft, dry cloth.
WARNING
projector to cool sufficiently. The high temperature state of the projector could
cause a burn and/or malfunction to the projector.
►Do not clean or service the inside of the projector. Doing is so dangerous.
►Avoid wetting the projector or inserting liquids in the projector. It could result in
a fire, an electric shock, and/or malfunction to the projector.
• Do not put anything containing water, cleaners or chemicals near the projector.
• Do not use aerosols or sprays.
CAUTION
but adverse influence such as discoloration, peeling paint, etc.
►Do not use cleaners or chemicals other than those specified in this manual.
►Do not polish or wipe with hard objects.
NOTICE ►Do not directly touch the lens surface with hands.
LWU720i/LHD720i/LWU620i
User's Manual - Operating Guide
►Make sure the power cord is not plugged in, and allow the
►Incorrect care of the projector could cause not only an injury
115
Maintenance
020-001279-01 Rev. 1 (10-2017)