Christie LWU620i User Manual page 80

SETUP menu
Item
STANDBY MODE
COLOR
UNIFORMITY
(continued on next page)
LWU720i/LHD720i/LWU620i
User's Manual - Operating Guide
Using ▲/▼ buttons switches the standby mode setting between
NORMAL and POWER SAVE.
NORMAL ó POWER SAVE
When POWER SAVE is selected, the power consumption in the
standby mode is lowered with some functional restriction as below:
• When POWER SAVE is selected, the RS-232C communication
control except to turn the projector on and the network function
are disabled while the projector is in the standby mode. If the
COMMUNICATION TYPE in the COMMUNICATION menu is set to
NETWORK BRIDGE, all of the RS-232C commands are disabled
(97).
• This function is unavailable when NETWORK BRIDGE is selected
for COMMUNICATION TYPE. (OPTION menu > SERVICE >
COMMUNICATION)
• This function is available only when OFF is selected for STACK
MODE. (OPTION menu > SERVICE > COMMUNICATION >
STACK)
• When POWER SAVE is selected, AUDIO OUT STANDBY setting
of AUDIO SOURCE (80) is invalid, and no signal is output from
AUDIO OUT port in the standby mode.
• When POWER SAVE is selected, STANDBY setting of MONITOR
OUT is invalid, and no signal is output from MONITOR OUT port in
the standby mode.
• When POWER SAVE is selected, the CENTERING feature while
the projector is in the standby mode is disabled.
• When POWER SAVE is selected, the Status Monitor and its button
operation are unavailable while the projector is in the standby mode.
• When POWER SAVE is selected, the HDMI Link and HDBaseT
functions are disabled while the projector is in the standby mode.
• When POWER SAVE is selected, SCHEDULE function (Ex. POWER-ON)
at STANDBY MODE will not be operated.
Selects image level and region must be required corrected, and
adjusts Color Balance.
Divides the screen into nine regions and adjusts gain of R/G/B of
each region.
Description
78
020-001279-01 Rev. 1 (10-2017)