Table of Contents
Advertisement
Network Menu
Wired LAN Menu
Sub Menu
DHCP
IP Address
Subnet Mask
Gateway Address
IP Address Display
You can set whether or not (On/Off) to use DHCP
If this is set to On you cannot set any more addresses.
g
You can input the IP address
assigned to the projector.
You can input a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
g
You can input the Subnet Mask
for the projector. You can input a number from 0 to 255 in each field of the address. However, the following subnet
masks cannot be used.
0.0.0.0, 255.255.255.255
You can input the IP address for the gateway for the projector.
You can input a number from 0 to 255 in each field of the address. However, the following Gateway addresses
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
To prevent the IP address from being displayed on the LAN Standby screen, set this to Off.
Function
g
.
70
g
cannot be used.
Advertisement
Table of Contents
