Interface - Epson EB-Z8355WUNL User Manual

Part Names and Functions

Interface

The following ports can be accessed by removing the interface cover. For
information on how to remove the interface cover and connect video
equipment, "Attaching and Removing the Interface Cover" p.166,
s
"Connecting to Video Equipment"
Name
A
Inputs video signals from HDMI compatible video
HDMI1 input port
equipment and computers. This projector is compatible
with HDCP
B
BNC input port For analog RGB signals from a computer and component
video signals from other video sources.
p.132
Function
g
signals.
Name
C
Video input port For composite video signals from video sources.
D
For S-video signals from video sources.
S-Video input port
E
Connection may become defective when a thick heavy
Cable holder
HDMI cable is connected to the HDMI input port. Run a
commercially available cable tie through this holder to
prevent the cable from disconnecting.
F
For analog RGB signals from a computer and component
Computer input port
video signals from other video sources.
G
Connects to the power cable.
Power inlet
The shape may differ depending on your projector model.
H
Connects the optional remote control cable set and inputs
Remote port
signals from the remote control. When the remote control
cable is plugged into this port, the remote receiver on the
projector is disabled.
I
RS-232C port When controlling the projector from a computer, connect
it to the computer with an RS-232C cable. This port is for
control use and should not normally be used. s
J
Connects to the optional wireless LAN unit. s
Wireless LAN Unit port
K
Outputs to an external monitor the analog signal from the
Monitor Out port
computer connected to the Computer input port or the
BNC input port. This is not available for component video
signals or other signals being input to any port other than
the Computer input port or the BNC input port.
p.161
s
L
Inputs SDI signals from a video equipment.
SDI port
(EB-Z8455WU/
Z8450WU only)
M
HDMI2 input port Inputs video signals from HDMI compatible video
equipment and computers. This projector is compatible
with HDCP
N
Connects a LAN cable to connect to a network.
LAN port
p.161
s
Function
p.115
p.165
g
signals.
13