Table of Contents
Advertisement
Installation Methods
The projector can be mounted on a ceiling or placed on a desk as shown
below. Also, it can be mounted at a tilted angle, so you can flexibly project
images to various places.
Warning
•
A special method of installation is required when suspending the projector from
a ceiling (ceiling mount). If installation work is not carried out correctly, the
projector could fall down. This may result in injury or accidents.
Contact your dealer or the nearest address provided in the Support and Service
Guide if you want to use this installation method.
List
•
If you use adhesives on the Ceiling mount fixing points to prevent the screws
from loosening, or if you use things such as lubricants or oils on the projector,
the projector case may crack causing it to fall from its ceiling mount. This
could cause serious injury to anyone under the ceiling mount and could
damage the projector.
When installing or adjusting the Ceiling mount, do not use adhesives to
prevent the screws from loosening and do not use oils or lubricants and so
on.
•
When mounting the projector on the ceiling, be sure to arrange measures to
prevent it from falling such as passing a wire through the handles.
Attention
•
Do not use the projector upside down.
•
Set the Direction properly in the configuration menu according to the angle of
installation.
s
p.57
•
Using the projector at an improper angle or setting the configuration menu
incorrectly causes malfunctions and shortens the operating life of optical parts.
Epson Projector Contact
s
• Suspend the projector from the
ceiling and project images from
in front of a screen.
• Project images from in front of
a screen.
• Project images directly up
• Project images at angle
130
• Suspend the projector from the
ceiling and project images from
behind a translucent screen.
• Project images from behind a
translucent screen.
• Project images directly down
Advertisement
Table of Contents
