Table of Contents
Advertisement
Changing Settings Using a Web Browser (Web Control)
You can make Configuration menu settings and control the projector by
using the Web browser of a computer that is connected to the projector via
a network. Setup and control operations can be performed remotely if this
function is used. In addition, you can use the computer's keyboard, so it is
easier to enter characters needed for setup, such certificate settings.
Use Microsoft Internet Explorer 6.0 or later as the Web browser. If using a
Mac OS, use Safari or Firefox.
• When communicating with a wireless LAN, connect in Advanced
q
mode. s
p.63
• Setup and control with a Web browser are possible if Standby Mode
is set to Communication On from the Extended menu of the
projector's Configuration menu, even if the projector is in standby
state (when the power is off). s
Displaying Web Control
Use the following procedure to display Web Control.
• If your Web browser is set up to connect via a proxy server, Web
q
Control cannot be displayed. To use Web Control, you need to
make network connection settings with a device other than a proxy
server.
• When setting the security using Web Control, we recommend
setting Secure HTTP to On. s p.71,
Procedure
A
Start the Web browser on the computer.
p.57
"Secure HTTP Notes"
B
Enter the IP address of the projector in the address input box
of the Web browser, and press the [Enter] key on the
computer's keyboard.
Web Control is displayed.
When Web Control Password is set in the Network menu from the
projector's Configuration Menu, enter the Password. Enter
EPSONWEB as the user name. Enter the characters set for the web
control password as the password. The default password is admin.
Displaying Web Remote
The Web Remote function allows you to perform projector remote control
operations from a Web browser.
Procedure
A
Display Web Control.
B
Click Web Remote.
Example: Web browser of a computer
C
The Web Remote screen appears.
"Displaying Web Control"
s
109
p.109
Advertisement
Table of Contents
