Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point
This completes the setup of the connection between the projector and
the access point. Press the [Menu] button to close the configuration
menu.
Making a connection using the PIN Code Method
Before you can make a connection using the PIN Code Method, a
q
connection must have already been setup between the computer and
the access point.
Procedure
A
Select "PIN Code Method".
The "PIN Code Method" screen is displayed.
B
Enter the PIN code displayed on the "PIN Code Method" screen
from the computer to the access point, and then select "Start
Setup".
The progress is displayed.
127