Functions For Enhancing Projection; Hiding The Image Temporarily (Shutter); Freezing The Image (Freeze) - Epson EB-Z8355WUNL User Manual

Functions for Enhancing Projection

Hiding the Image Temporarily (Shutter)

You can use this when you want to focus the audience's attention on what
you are saying, or if you do not want to show details such as when you are
changing between files during presentations from a computer.
Make sure that the Shutter Button is set to Electric Shutter from
Operation in the Extended menu.
Procedure
Using the Remote Control
Each time you press the buttons, the electric shutter closes or opens.
Using the Control Panel
• When the shutter is closed and no operations are performed for
q
about 30 minutes, the projector enters Sleep Mode and turns off
automatically. If you do not want Sleep Mode to activate, change the
Shutter Timer setting to Off from Operation in the Extended
menu. s p.57
• If you press [t] button while the shutter is closed, the shutter
automatically opens and a message requesting confirmation to turn
off the power is displayed on the screen.
• The Lamp1 and Lamp2 indicators flash green while the shutter is
activated.
• When an event that is set in Schedule is executed, the shutter is
canceled.

Freezing the Image (Freeze)

When the freeze function is activated on moving images, the frozen image
continues to be projected on the screen, so you can project a moving image
one frame at a time like a still photo. Also, you can perform operations
such as changing between files during presentations from a computer
without projecting any images if the freeze function is activated beforehand.
Procedure
Remote Control
Each time you press the button, Freeze turns on or off.
33