Loading The Memory; Erasing The Memory; Renaming The Memory - Epson EB-Z8355WUNL User Manual

Memory Function
If the mark on the left of the memory name is turned green, it means
q
the memory has already been registered. When you select the
registered memory, a message will ask if you want to overwrite the
memory. If you select Yes, the previous settings are deleted and the
current settings are registered.

Loading the memory

Procedure
A
During projection, press the [Menu] button on the remote
control or control panel, and select Settings - "Memory" from
the configuration menu.
B
Select "Load Memory", and then press the [Enter] button.
C
Select the desired memory, and then press the [Enter] button.
The settings registered to the memory are applied.

Erasing the memory

Procedure
A
Press the [Menu] button on the remote control or control
panel, and select Settings - "Memory" from the configuration
menu.
B
Select "Erase Memory", and then press the [Enter] button.
C
Select the desired memory, and then press the [Enter] button.
D
Select "Yes" when the confirmation message is displayed.
The registered memory will be erased.

Renaming the memory

Procedure
A
Press the [Menu] button on the remote control or control
panel, and select Settings - "Memory" from the configuration
menu.
B
Select "Rename Memory", and then press the [Enter] button.
C
Select the desired memory, and then press the [Enter] button.
D
Enter the memory name using the soft keyboard.
Keyboard Operations"
Press [Finish] to complete renaming.
s
p.61
45
"Soft