Rear - Epson EB-Z8355WUNL User Manual

Part Names and Functions

Rear

Name
A
Exhaust vent for air used to cool the projector internally.
Air exhaust vent
Also, open this cover to replace the projector's lamps.
(Lamp cover)
B
Rear foot When set up on a desk, turn to extend and retract to adjust
the horizontal tilt.
The rear adjustable feet can be removed when the
projector is installed on a ceiling. s
C
Lamp cover open tab Use these tabs to open the lamp cover. s
D
Remote Receiver Receives signals from the remote control. s
E
The color of the indicators and whether they are flashing
Status indicators
or lit indicate the status of the projector. s
Function
Caution
Do not place objects that may become warped or
otherwise affected by heat near the Air exhaust vent
and do not put your face or hands near the vent
while projection is in progress.
p.168
p.101
Name
F
Control Panel
p.18
p.83
Function
s "Control Panel" p.14
12