Table of Contents
Advertisement
Settings for Multiple Projectors
G
Move the [
] button to the point you want to correct, then
h
press the [Enter] button.
Remote Control
If the [Esc] button is held down for about two seconds while selecting
q
the point, the confirm default reset screen is displayed.
Select "Yes" to reset the result of Point Correction.
H
Press the [
] button to correct the distortion.
h
Remote Control
To continue to correct another point, press the [Esc] button to return
to the previous screen, then repeat the step 7 and 8.
If you press the [Default] button while adjusting, the value that you
q
are adjusting is reset to the default.
I
When you are done, press the [Esc] button to exit the
correction menu.
Checking the Color Mode
Set the Color Mode to Multi-Projection.
154
p.28
s
Advertisement
Table of Contents
