Installing The Batteries - Epson EB-Z8355WUNL User Manual

Table of Contents

Part Names and Functions

Name

[Auto] button

If pressed during projection of computer analog RGB

signals, it automatically adjusts the Tracking, Sync., and

Position to project the optimum image.

The Aspect Ratio

[Aspect] button

pressed. s

[Lens Shift] button

Press to adjust the lens shift. s

Press to set the remote control ID. s

[ID] button

Displays and closes the Help screen which shows you how

[Help] button

to deal with problems if they occur. s

Remote port

Connects the optional remote control cable set and

outputs signals from the remote control. When the remote

control cable is plugged into this remote port, the remote

receiver is disabled.

Reset to default the setting values being adjusted in some

[Default] button

configuration menus.

[Zoom] button

Press to adjust the zoom. s Quick Start Guide

[Num] button

Use this button to enter passwords, IP Address from the

Network, and so on. s

Press to adjust the focus. We recommend setting the focus,

[Focus] button

zoom, and lens shift at least 30 minutes after you start the

projection, because images are not stable right after

turning on the projector. s Quick Start Guide

Numeric buttons

Use this button to enter passwords, remote control ID

settings, IP Address from the Network, and so on.

s p.152,

Each time the button is pressed, the Color Mode changes.

[Color Mode] button

p.28

[Freeze] button

Images are paused or unpaused. s

[E-Zoom] buttons

The [z] button enlarges the image without changing the

[z][x]

projection size.

The [x] button reduces the parts of images that have been

enlarged using the [z] button. s

Function

changes each time the button is

p.22

p.138

p.150

p.81

p.38

p.33

p.34

Name

[Pointer] button

Press to activate the on screen pointer. s

Stops the current function. If pressed when the

[Esc] button

configuration menu is displayed, it moves to the previous

menu level. s

Acts as a mouse's right button when using the optional

wireless mouse receiver.

[User] button

Press to assign a frequently used item from the available

configuration menu items. By pressing the button the

assigned menu item selection/adjustment screen is

displayed, allowing you to make one-touch settings/

adjustments. s

Test Pattern is assigned as the default setting.

[SDI] button

Changes to images from the SDI input port. s

This button does not function when using EB-Z8355W/

Z8350W/Z10005/Z10000/Z8150.

ID switch

Use this switch to enable (On)/disable (Off) ID settings for

the remote control. s

Each time the button is pressed, the image displayed

[HDMI 1/2] button

changes between the HDMI1 input port and HDMI2

input port. s

[Search] button

Changes to the next input source that is connected to the

projector and is sending an image. s

A light is emitted when outputting remote control signals.

Indicators

Remote control light-

Outputs remote control signals.

emitting area