Network Menu - Wired Lan Menu - Epson V11H818053 User Manual

Projector Network Settings - Network Menu
Setting Options
Verify Server Cert.
CA certificate
RADIUS
Serv.Name
Channel 1ch
6ch
11ch
IP Settings DHCP
IP Address
Subnet Mask
Gateway Address
SSID Display On
Off
IP Address Display On
Off
IPv6 Settings
Description
Verify Server Cert.: selects whether to
verify the server certificate when a CA
certificate has been set.
CA certificate: imports the CA certificate
when using the PEAP, PEAP-TLS, EAP-
TLS, or EAP-FAST type.
RADIUS Serv.Name: enter the server
name to verify. You can enter up to 32
alphanumeric characters (you cannot use
* : and spaces).
In Quick connection mode, selects the
frequency band (channel) used by the
wireless LAN.
DHCP: set to On if your network assigns
addresses automatically; set to Off to
manually enter the network's IP
Address, Subnet Mask, and Gateway
Address using 0 to 255 for each address
field.
Do not use these addresses: 0.0.0.0,
127.x.x.x, 192.0.2.x or 224.0.0.0 through
255.255.255.255 (where x is a number
from 0 to 255) for IP Address,
255.255.255.255 or 0.0.0.0 through
254.255.255.255 for Subnet Mask, and
0.0.0.0, 127.x.x.x or 224.0.0.0 through
255.255.255.255 for Gateway Address.
Select whether to display the SSID on the
network standby screen and Home
screen.
Select whether to display the IP address
on the network standby screen and
Home screen.
Select the IPv6 settings if you want to
connect the projector to the network
using IPv6:
Setting Options
IPv6
Auto Configuration Auto Configuration: set to On to assign
Use Temporary
Address
* Available only for EB-2265U/EB-2255U/EB-2250U/EB-2245U/EB-
2165W/EB-2155W/EB-2065/EB-2055/EB-X550KG/EB-X500KG.

Network Menu - Wired LAN Menu

Settings on the Wired LAN menu let you select the wired LAN settings.
Network > Network Configuration > Wired LAN
s
155
Description
IPv6: set to On if you want to connect
the projector to the network using IPv6.
IPv6 is supported to monitor and control
the projector over a network using Epson
Web Control and PJLink.
addresses automatically according to the
Router Advertisement.
Use Temporary Address: set to On if
you want to use a temporary IPv6
address.