Table of Contents
Advertisement
List of Functions
Wired LAN menu
Submenu
You can make settings related to the following addresses.
IP Settings
DHCP: Set to On to configure the network using DHCP
is set to On, you cannot set any more addresses.
IP Address: You can enter the IP address
projector. You can enter a number from 0 to 255 in each field of
the address. However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask: You can enter the Subnet Mask
You can enter a number from 0 to 255 in each field of the address.
However, the following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address: You can enter the IP address for the gateway
for the projector. You can enter a number from 0 to 255 in each
field of the address. However, the following Gateway Address
cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Function
g
If this
g
assigned to the
g
for the projector.
g
Submenu
IP Address Dis-
To prevent the IP address from being displayed on the LAN
play
Standby screen, set this to Off.
Notification menu
When this is set, you receive an email notification if a problem or warning
occurs in the projector.
"Reading error notification mail"
s
Submenu
Mail Notification
Set to On to send an email to the preset addresses when a problem
or warning occurs with a projector.
You can input the IP Address
SMTP Server
projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from
0 to 255)
150
Function
p.207
Function
g
for the SMTP server for the
Advertisement
Table of Contents
