Projector Parts - Interface - Epson EB-PU2116B User Manual

Projector Parts and Functions

Projector Parts - Interface

Attention
• Check the shape and orientation of the connectors on any cable you plan to
connect. Do not force a connector into a port if it does not fit. The device or
your projector could be damaged or could malfunction.
• Do not turn on the input source before connecting it to the projector. Doing so
could damage the projector.
• If necessary, use an adapter that allows you to connect to an input port on the
projector.
Name Function
Computer port Inputs image signals from a computer.
A
(Mini D-Sub15-pin,
female)
Name Function
Audio Out port Outputs audio from the current input source to an
B
external speaker. You can also connect the projector to
(Stereo mini pin jack)
an amplifier with speakers.
To output audio from the speaker connected to this
port, select Projector as the Audio Out Device setting
in the projector's Settings menu. When an audio/video
system is not connected to the projector, audio is
output from the speaker connected to this port even if
Audio Out Device is set to AV System.
s Settings > HDMI Link > Audio Out Device
If you want to output audio for the HDMI source from
the external speakers when the projector is turned off,
select Always On as the A/V Output setting in the
projector's Extended menu.
s Extended > A/V Settings > A/V Output
RS-232C port Use to connect an RS-232C cable to control the
C
projector from a computer.
(Mini D-Sub 9-pin,
male)
Remote port Connects the remote control to the projector using a
D
commercially available 3.5 mm stereo mini-jack audio
(Stereo mini pin jack)
cable and inputs signals from the remote control.
When the remote control is connected, the remote
receiver on the projector is disabled.
SDI Out/In ports (EB‑PU2216B/EB‑PU2213B only)
E
(BNC) Inputs video signals from SDI compatible video
equipment.
Outputs video signals input from the SDI In port to an
external monitor.
You can connect two projectors in a chain using a SDI
cable.
If you want to output images to an external monitor
when the projector is turned off, select Always On as
the A/V Output setting in the projector's Extended
menu.
s Extended > A/V Settings > A/V Output
15