Kyocera ECOSYS M3645dn Operation Manual page 370

Troubleshooting > Troubleshooting
Message
Replace MK.
Replace the toner.
Restricted by Job
Accounting.
Cannot print.
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Err. Clear (page 8-32)
S
Message
Scanner memory is full.
Job is canceled.
*1
Send Error.
Shake the toner
container.
SSD error. Job is
canceled.
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Err. Clear (page 8-32)
Checkpoints
—
―
—
Checkpoints
—
—
—
—
10-22
Corrective Actions
Replacement of the parts in the
maintenance kit is necessary at
every 300,000 pages of printing and
requires professional servicing.
Contact your Service
Representative.
Replace the toner container to our
specified toner container.
This job is canceled because it is
restricted by Job Accounting. Select
[OK].
Corrective Actions
Scanning cannot be performed any
more due to insufficient memory.
The job is canceled. Select [OK].
An error has occurred during
transmission. The job is canceled.
Select [OK].
Refer to Responding to Send Error
for the error code and corrective
actions.
Shake the toner container well and
reinstall it.
An error has occurred on SSD. Job
is canceled. Select [OK].
The possible error codes and their
descriptions are as follows.
01: The amount of data that can be
saved at once has been exceeded.
Turn the power OFF/ON. If the error
still occurs, divide the file into
smaller files. If the error occurs after
the file is divided, the specified file
may be damaged. Delete the file.
04: Insufficient space on SSD to
complete this operation. Move data
or delete unneeded data.
Reference
Page
—
page 10-5
—
Reference
Page
—
page 10-24
page 10-5
—