Kyocera ECOSYS M3645dn Operation Manual page 276

Setup and Registration (System Menu) > System Menu
Item
eSCL over SSL
*2
Wi-Fi Direct
*2
Wi-Fi
Wired Network
REST
*2
Wi-Fi Direct
*2
Wi-Fi
Wired Network
REST over SSL
*2
Wi-Fi Direct
*2
Wi-Fi
Wired Network
*1 The setting will be changed after restarting the device or network.
*2 Displayed only when the wireless network function is available on the machine.
*3 Set "SSL" to [On] in Secure Settings.
Secure Settings (page 8-16)
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Secure Settings
Item
SSL
Selects whether to receive scanned documents using eSCL over SSL.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [eSCL over SSL] is set to [On].
Select whether to use REST. When selecting [On], specifies the port number used. The default
*1
port number is 9080.
Value: Off, On (Port Number: 1 to 32767)
NOTE
This function is displayed when [REST] is set to [On].
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [REST] is set to [On].
Select whether to use REST secured by SSL. When selecting [On], specifies the port number
used. The default port number is 9081.
Value: Off, On (Port Number: 1 to 32767)
NOTE
• This function is displayed when [REST over SSL] is set to [On].
• When selecting [On], it also requires a certificate for SSL. the default certificate is the self-
certificate of the machine.
Command Center RX User Guide
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [REST over SSL] is set to [On].
Select whether or not to use SSL.
Value: Off, On
8-16
Description
*1, *3
Description
*1, *3