Kyocera ECOSYS M3645dn Operation Manual page 293

Setup and Registration (System Menu) > System Menu
Function Defaults
[System Menu/Counter] key > [▲] [▼] key > [Common Settings] > [OK] key > [▲] [▼] key > [Function Defaults] >
[OK] key
Item
Color Selection
Scan Resolution
FAX Resolution
Orig.Image(Copy)
Orig.Image(Send)
Zoom
Collate
Orig.Orientation
Backgrnd(Copy)
Backgrnd(Send)
EcoPrint
Prevent B-t Copy
Prevent B-t Send
Skip Blank(Copy)
Skip Blank(Send)
File Name Entry
Select the default color mode for scanning documents.
Value: Auto (Color/Gray), Auto (Color/B & W), Full Color, Grayscale, Black & White
Select the default scanning resolution.
Value: 200×100dpi Norm., 200×200dpi Fine, 200×400dpi S.Fin, 300×300dpi,
400×400dpi U.Fin, 600×600dpi
FAX Operation Guide
Set the default original document type for copying.
Value: Text+Photo, Photo, Text, Graphic/Map
Set the default original document type for sending.
Value: Text+Photo, Photo, Text, for OCR, Light Text/Line
NOTE
[for OCR] is only available when "Color Selection" is set to [Auto (Color/B & W)] or [Black &
White].
Select the enlarged/reduced default when paper size/sending size changed after the originals set.
Value: 100%, Auto
Set the defaults for Collate.
Value: Off, On
Set the original orientation defaults.
Value: Top Edge on Top, Top Edge on Left
Set the default Backgrnd Density (Copy).
Value: Off, Auto, Manual (Darker 5)
Set the default Backgrnd Density (Send).
Value: Off, Auto, Manual (Darker 5)
Select the EcoPrint default.
Value: Off, On
Set the default value for preventing bleed-through (Copy).
Value: Off, On
Set the default Prevent Bleed (Send).
Value: Off, On
Set the default Skip Blank(Copy) settings.
Value: Off, On
Set the default Skip Blank(Send) settings.
Value: Off, On
Set an automatically entered name (default) for jobs. Additional information such as Date and
Job No. can also be set.
Value
File Name: Up to 32 characters can be entered.
Additional Info: None, Date, Job No., Job No. + Date, Date + Job No.
8-33
Description