Kyocera ECOSYS M3645dn Operation Manual page 279

Setup and Registration (System Menu) > System Menu
Item
Encryption
Data Encryption
WEP Key
Preshared Key
*1 Not displayed if you selected [Ad Hoc] for "Connection Mode".
*2 Not displayed if you selected [WPA2-PSK] for "Netwk Authentic.".
*3 Displayed if you selected [WPA-PSK] or [WPA2-PSK] for "Netwk Authentic.".
Primary Network
[System Menu/Counter] key > [▲] [▼] key > [System/Network] > [OK] key > [▲] [▼] key > [Primary Network] > [OK]
key
NOTE
This function is displayed when the optional Network Interface Kit or Wireless Network Interface Kit is installed.
Item
Primary Network
Select encryption settings. The setting values vary depending on the "Netwk Authentic."
setting.
Set the encryption method.
When "Netwk Authentic." is set to [Open] or [Shared]:
Value: Disable, WEP
When "Netwk Authentic." is set to [WPA-PSK] or [WPA2-PSK]:
*2
Value: TKIP , AES, Auto
Register the WEP key. Select [Edit] and Enter the WEP Key using the numeric keys.
NOTE
Up to 26 characters can be entered.
Character Entry Method (page 11-9)
*3
Register the Preshared Key. Select [Edit] and Enter the Preshared Key using the numeric
keys.
NOTE
The number of characters is between 8 and 64.
Character Entry Method (page 11-9)
Specify the network interface card to be used for the send function, the network authentication
and connecting to external address book.
Value: Wi-Fi, Wired Network, Option Network
Description
*2
Description
8-19