Supermicro SuperStorageSystem SSG-2028R-DN2R24L User Manual page 71

SUPERSTORAGESYSTEM SSG-2028R-DN2R24L User's Manual
Administrator Password
Use this feature to set the administrator password which is required before entering
the BIOS setup utility. The length of the password should be from 3 characters
to 20 characters long.
User Password (Available after an Administrator Password is entered)
Use this feature to set the user password which is required to enter the BIOS
setup utility. The length of the password should be from 3 characters to 20 char-
acters long.
Secure Boot Menu

The following items will display:
•
System Mode
•
Secure Boot
•
Vendor Keys
Secure Boot
Select Enable for secure boot support to ensure system security at bootup. The
options are Enabled and Disabled.
Secure Boot Mode
This item allows the user to select the desired secure boot mode for the system.
The options are Standard and Custom.
CSM Support
Select Enabled to support Compatibility Support Module (CSM) to enhance system
security. The options are Enabled and Disabled.
Key Management

Provision Factory Default Keys
Select Enable to install all manufacturer default keys for the following system se-
curity settings. The options are Disabled and Enabled.
7-36
Enroll All Factor Default Keys

Select Enable to install all manufacturer defaults for the following system security
settings. The options are Yes and No.
Save All Secure Boot Variables

This feature allows the user to set and save the following Secure Boot Variable
settings:
Platform Key (PK)

This feature allows the user to configure and save platform key settings.
Key Exchange Key

This feature allows the user to configure and save Key-Exchange-Key settings.
Authorized Signatures

This feature allows the user to set and save authorized signatures and grant access
to those whose names appear on the list.
Forbidden Signatures

This feature allows the user to set and save the forbidden signatures and deny the
access to those whose names appear on the list.
Authorized TimeStamps

This feature allows the user to set and save the timestamps for authorized signa-
tures to indicate when these signatures were entered into the system.
7-37
Chapter 7: AMI BIOS