Supermicro SSG-937R-E2CJB User Manual
  1. Manuals
  2. Brands
  3. Supermicro Manuals
  4. Server
  5. SSG-937R-E2CJB
  6. User manual
Supermicro SSG-937R-E2CJB User Manual

Supermicro SSG-937R-E2CJB User Manual

Super storage bridge bay
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Super Storage Bridge Bay
SSG-937R-E2CJB
USER'S MANUAL
1.0

Advertisement

Table of Contents
loading

Related Manuals for Supermicro SSG-937R-E2CJB

Summary of Contents for Supermicro SSG-937R-E2CJB

  • Page 1 Super Storage Bridge Bay SSG-937R-E2CJB USER’S MANUAL...
  • Page 2 This product, including software and docu- mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except as expressly permitted by the terms of said license.

  • Page 3: About This Manual

    SSG-937R-E2CJB. Installa- tion and maintenance should be performed by experienced technicians only. The SSG-937R-E2CJB is a high-end storage solution based on the SC937 3U rackmount chassis and two AOM-SAS3-937EL-JB expanders. Manual Organization...
  • Page 4 SSG-937R-E2CJB User's Manual Chapter 5: Advanced Chassis Setup Refer to Chapter 5 for detailed information on the SC937 chassis. You should follow the procedures given in this chapter when installing, removing or reconfiguring SAS or peripheral drives and when replacing system power supply units and cooling fans.
  • Page 5 Preface Notes...

  • Page 6: Table Of Contents

    SSG-937R-E2CJB User's Manual Table of Contents Chapter 1 Introduction Overview ......................1-1 SAS Expander ....................1-2 Cascading ....................... 1-2 IPMI ......................... 1-2 SAS ......................... 1-2 Server Chassis Features ................1-2 System Power ....................1-2 SAS Subsystem ....................1-2 Front Control Panel ..................1-3 Cooling System ....................
  • Page 7 Table of Contents Control Panel LEDs ..................3-1 Power Fail ....................... 3-1 Overheat/Fan Fail: ..................3-2 Cascading Status (IN) ..................3-2 Cascading Status (OUT) ................. 3-2 Power ......................3-3 Drive Carrier LEDs ..................3-3 Chapter 4 Standardized Warning Statements for AC Systems About Standardized Warning Statements ............
  • Page 8 SSG-937R-E2CJB User's Manual Notes viii...

  • Page 9: Chapter 1 Introduction

    Chapter 1 Introduction Overview The SSG-937R-E2CJB is a high-end Super Storage Bridge Bay (SBB) JBOD system comprised of two main subsystems: the SC937 chassis and two AOM-SAS3-937EL- JB SAS expander cards. In addition to the chassis and expander cards, various hardware components have been included with the 937R-E2CJB, as listed below: •...

  • Page 10: Sas Expander

    Front Control Panel Two control panels are included on each end of the SSG-937R-E2CJB to provide you with system monitoring and control. LEDs indicate system power, cascade status, system overheat and power supply failure. Each set of LEDs are associ- ated with the node/serverboard on the same side of the chassis.

  • Page 11: Cooling System

    Chapter 1: Introduction Cooling System The system has two sets of counter-rotating cooling fans, one set in each node. This counter-rotating action works to dampen vibration levels while generating ex- ceptional airflow. These fans are controlled and monitored by the expander within the same node through SES.

  • Page 12: Contacting Supermicro

    SSG-937R-E2CJB User's Manual Contacting Supermicro Headquarters Address: Super Micro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (Technical Support) Website: www.supermicro.com Europe Address: Super Micro Computer B.V.

  • Page 13: Chapter 2 Server Installation

    Unpacking the System You should inspect the box the SSG-937R-E2CJB was shipped in and note if it was damaged in any way. If the server itself shows damage you should file a damage claim with the carrier who delivered it.

  • Page 14: Warnings And Precautions

    SSG-937R-E2CJB User's Manual Warnings and Precautions Rack Precautions • Ensure that the leveling jacks on the bottom of the rack are fully extended to the floor with the full weight of the rack resting on them. • In single rack installation, stabilizers should be attached to the rack. In multiple rack installations, the racks should be coupled together.

  • Page 15: Rack Mounting Considerations

    Chapter 2: Server Installation Rack Mounting Considerations Ambient Operating Temperature If installed in a closed or multi-unit rack assembly, the ambient operating tempera- ture of the rack environment may be greater than the ambient temperature of the room. Therefore, consideration should be given to installing the equipment in an environment compatible with the manufacturer’s maximum rated ambient tempera- ture (Tmra).

  • Page 16: Installing The System Into A Rack

    SSG-937R-E2CJB User's Manual Installing the System into a Rack This section provides information on installing the SSG-937R-E2CJB into a rack unit with the quick-release rails provided. There are a variety of rack units on the market, which may mean the assembly procedure will differ slightly. You should also refer to the installation instructions that came with the rack unit you are using.

  • Page 17: Installing The Outer Rack Rails

    Chapter 2: Server Installation Installing the Outer Rack Rails Outer rails attach to the server rack and hold the server in place. The outer rails for the SC937 chassis extend between 30 inches and 33 inches. Installing the Outer Rails 1.

  • Page 18: Installing The Chassis Into A Rack

    SSG-937R-E2CJB User's Manual Figure 2-4. Installing the Chassis into the Rack Installing the Chassis into a Rack Installing into a Rack 1. Confirm that the inner and outer rails are properly installed. 2. Line up the inner (chassis) rails with the front of the outer (rack) rails.

  • Page 19: Chapter 3 System Interface

    Chapter 3: System Interface Chapter 3 System Interface Overview There are several LEDs on two control panels as well as others on the drive car- riers to keep you constantly informed of the overall status of the system as well as the activity and health of specific components.

  • Page 20: Overheat/Fan Fail

    SSG-937R-E2CJB User's Manual Overheat/Fan Fail: When this LED flashes, it indicates a fan failure. When on continuously it indicates an overheat condition, which may be caused by cables obstructing the airflow in the system or the ambient room temperature being too warm.

  • Page 21: Drive Carrier Leds

    Chapter 3: System Interface Drive Carrier LEDs Each drive carrier has two LEDs: • Green: When illuminated, the green LED on the drive carrier indicates the drive is powered on. If this LED is not lit, it means no power is being provided for the drive.
  • Page 22 SSG-937R-E2CJB User's Manual Notes...

  • Page 23: Chapter 4 Standardized Warning Statements For Ac Systems

    The following statements are industry standard warnings, provided to warn the user of situations which have the potential for bodily injury. Should you have questions or experience difficulty, contact Supermicro's Technical Support department for assistance. Only certified technicians should attempt to install or configure components.
  • Page 24 SSG-937R-E2CJB User's Manual Warnung WICHTIGE SICHERHEITSHINWEISE Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut.
  • Page 25 Warning Statements for AC Systems ‫جسذٌة‬ ‫اصابة‬ ً‫تتسبب ف‬ ‫حالة ٌوكي أى‬ ً‫اًك ف‬ ‫خطز‬ ًٌ‫ٌع‬ ‫هذا الزهز‬ !‫تحذٌز‬ ‫الذوائز‬ ‫بالوخاطز الٌاجوة عي‬ ‫ي على علن‬ ، ‫ك‬ ‫هعذات‬ ‫تعول على أي‬ ‫قبل أى‬ ‫الكهزبائٍة‬ ‫حىادث‬ ‫أي‬ ‫وقىع‬ ‫وٌع‬ ‫ل‬ ‫الىقائٍة‬...

  • Page 26: Installation Instructions

    SSG-937R-E2CJB User's Manual Installation Instructions Warning! Read the installation instructions before connecting the system to the power source. 設置手順書 システムを電源に接続する前に、 設置手順書をお読み下さい。 警告 将此系统连接电源前,请先阅读安装说明。 警告 將系統與電源連接前，請先閱讀安裝說明。 Warnung Vor dem Anschließen des Systems an die Stromquelle die Installationsanweisungen lesen. ¡Advertencia! Lea las instrucciones de instalación antes de conectar el sistema a la red de alimentación.

  • Page 27: Circuit Breaker

    Chapter 4: Warning Statements for AC Systems Circuit Breaker Warning! This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than: 250 V, 20 A. サーキッ ト ・ ブレーカー この製品は、 短絡 （過電流） 保護装置がある建物での設置を前提としています。 保護装置の定格が250 V、...

  • Page 28: Power Disconnection Warning

    SSG-937R-E2CJB User's Manual 경고! 이 제품은 전원의 단락(과전류)방지에 대해서 전적으로 건물의 관련 설비에 의존합니다. 보호장치의 정격이 반드시 250V(볼트), 20A(암페어)를 초과하지 않도록 해야 합니다. Waarschuwing Dit product is afhankelijk van de kortsluitbeveiliging (overspanning) van uw electrische installatie. Controleer of het beveiligde aparaat niet groter gedimensioneerd is dan 220V, 20A.
  • Page 29 Chapter 4: Warning Statements for AC Systems ¡Advertencia! El sistema debe ser disconnected de todas las fuentes de energía y del cable eléctrico quitado de los módulos de fuente de alimentación antes de tener acceso el interior del chasis para instalar o para quitar componentes de sistema. Attention Le système doit être débranché...

  • Page 30: Equipment Installation

    SSG-937R-E2CJB User's Manual Equipment Installation Warning! Only trained and qualified personnel should be allowed to install, replace, or service this equipment. 機器の設置 トレーニングを受け認定された人だけがこの装置の設置、 交換、 またはサービスを許可 されています。 警告 只有经过培训且具有资格的人员才能进行此设备的安装、更换和维修。 警告 只有經過受訓且具資格人員才可安裝、更換與維修此設備。 Warnung Das Installieren, Ersetzen oder Bedienen dieser Ausrüstung sollte nur geschultem, qualifiziertem Personal gestattet werden.

  • Page 31: Restricted Area

    Chapter 4: Warning Statements for AC Systems Waarschuwing Deze apparatuur mag alleen worden geïnstalleerd, vervangen of hersteld door geschoold en gekwalificeerd personeel. Restricted Area Warning! This unit is intended for installation in restricted access areas. A restricted access area can be accessed only through the use of a special tool, lock and key, or other means of security.

  • Page 32: Battery Handling

    SSG-937R-E2CJB User's Manual ‫אזור עם גישה מוגבלת‬ !‫אזהרה‬ ‫יש להתקין את היחידה באזורים שיש בהם הגבלת גישה. הגישה ניתנת בעזרת‬ .)'‫כלי אבטחה בלבד (מפתח, מנעול וכד‬ ‫محظورة‬ ‫مناطق‬ ٍ‫نتركُبها ف‬ ‫هذه انىحذة‬ ‫تخصيص‬ ‫تم‬ ،‫أداة خاصت‬ ‫من خالل استخذاو‬ ‫فقط‬...
  • Page 33 Chapter 4: Warning Statements for AC Systems Warnung Bei Einsetzen einer falschen Batterie besteht Explosionsgefahr. Ersetzen Sie die Batterie nur durch den gleichen oder vom Hersteller empfohlenen Batterietyp. Entsorgen Sie die benutzten Batterien nach den Anweisungen des Herstellers. Attention Danger d'explosion si la pile n'est pas remplacée correctement. Ne la remplacer que par une pile de type semblable ou équivalent, recommandée par le fabricant.

  • Page 34: Redundant Power Supplies

    SSG-937R-E2CJB User's Manual Redundant Power Supplies Warning! This unit might have more than one power supply connection. All connections must be removed to de-energize the unit. 冗長電源装置 このユニッ トは複数の電源装置が接続されている場合があります。 ユニッ トの電源を切るためには、 すべての接続を取り外さなければなりません。 警告 此部件连接的电源可能不止一个，必须将所有电源断开才能停止给该部件供电。 警告 此裝置連接的電源可能不只一個，必須切斷所有電源才能停止對該裝置的供電。 Warnung Dieses Gerät kann mehr als eine Stromzufuhr haben. Um sicherzustellen, dass der Einheit kein trom zugeführt wird, müssen alle Verbindungen entfernt werden.

  • Page 35: Backplane Voltage

    Chapter 4: Warning Statements for AC Systems ‫امداد الطاقة‬ ‫بوحدات‬ ‫عدة اتصاالت‬ ‫جهاز‬ ‫ال‬ ‫يكون لهذا‬ ‫قد‬ ‫الكهرباء‬ ‫عن‬ ‫وحدة‬ ‫ال‬ ‫لعسل‬ ‫كافة االتصاالت‬ ‫يجب إزالة‬ 경고! 이 장치에는 한 개 이상의 전원 공급 단자가 연결되어 있을 수 있습니다. 이 장치에 전원을...

  • Page 36: Comply With Local And National Electrical Codes

    SSG-937R-E2CJB User's Manual ‫מתח בפנל האחורי‬ !‫הרה‬ ‫אז‬ ‫קיימת סכנת מתח בפנל האחורי בזמן תפעול המערכת. יש להיזהר במהלך‬ .‫העבודה‬ ‫اللىحة‬ ‫أوالطاقة المىجىدة على‬ ‫التيار الكهزبائي‬ ‫مه‬ ‫خطز‬ ‫هناك‬ ‫هذا الجهاس‬ ‫خدمة‬ ‫كه حذرا عند‬ ‫يعمل‬ ‫النظام‬ ‫عندما يكىن‬ 경고! 시스템이...

  • Page 37: Product Disposal

    Chapter 4: Warning Statements for AC Systems Attention L'équipement doit être installé conformément aux normes électriques nationales et locales. ‫תיאום חוקי החשמל הארצי‬ !‫אזהרה‬ ‫הציוד חייבת להיות תואמת לחוקי החשמל המקומיים והארציים‬ ‫התקנת‬ ‫المتعلقة‬ ‫المحلية والىطىية‬ ‫قىاويه‬ ‫يجب أن يمتثل لل‬ ‫الكهربائية‬...

  • Page 38: Hot Swap Fan Warning

    SSG-937R-E2CJB User's Manual Attention La mise au rebut ou le recyclage de ce produit sont généralement soumis à des lois et/ou directives de respect de l'environnement. Renseignez-vous auprès de l'organisme compétent. ‫סילוק המוצר‬ !‫אזהרה‬ .‫חוקי המדינה‬ ‫סילוק סופי של מוצר זה חייב להיות בהתאם להנחיות ו‬...
  • Page 39 Chapter 4: Warning Statements for AC Systems Warnung Gefährlich Bewegende Teile. Von den bewegenden Lüfterblätter fern halten. Die Lüfter drehen sich u. U. noch, wenn die Lüfterbaugruppe aus dem Chassis genommen wird. Halten Sie Finger, Schraubendreher und andere Gegenstände von den Öffnungen des Lüftergehäuses entfernt. ¡Advertencia! Riesgo de piezas móviles.

  • Page 40: Power Cable And Ac Adapter

    Electrical Appliance and Material Safety Law prohibits the use of UL or CSA -certified cables (that have UL/CSA shown on the code) for any other electrical devices than products designated by Supermicro only. 電源コードとACアダプター 製品を設置する場合、 提供または指定された接続ケーブル、 電源コードとACアダプター...
  • Page 41 Appareils électroménagers et de loi sur la sécurité Matériel interdit l'utilisation de UL ou CSA câbles certifiés qui ont UL ou CSA indiqué sur le code pour tous les autres appareils électriques que les produits désignés par Supermicro seulement.
  • Page 42 SSG-937R-E2CJB User's Manual Notes 4-20...

  • Page 43: Chapter 5 Advanced Chassis Setup

    Chapter 5: Advanced Chassis Setup Chapter 5 Advanced Chassis Setup This chapter covers the steps required to install components and perform mainte- nance on the SC937 chassis. For component installation, follow the steps in the order given to eliminate the most common problems encountered. If some steps are unnecessary, skip ahead to the step that follows.

  • Page 44: Control Panel

    SSG-937R-E2CJB User's Manual Control Panel Control Panel Hot-Swap Drives (16) Power Supply Power Supply Fan Assembly Fan Assembly Figure 5-1. Front and Rear Chassis Views Control Panel The LEDs on the control panels are associated with the node located on the same side of the chassis.

  • Page 45: System Fans

    Check the IPMI sensor list to determine which of the fans has failed. Replacing System Fans Replace the failed fan with an identical 4-cm, 12-volt counter-rotating fan (p/n FAN- 0157L4, available from Supermicro). See Figures 5-2 and 5-3. Replacing Fans 1. Shut down the node with the failed fan(s).
  • Page 46 SSG-937R-E2CJB User's Manual Figure 5-2. Removing a Node Figure 5-3. Exploded View of Fan Assemblies...

  • Page 47: Drive Bay Installation/Removal

    Chapter 5: Advanced Chassis Setup Drive Bay Installation/Removal Accessing the Drive Bays SAS Drives: You do not need to access the inside of the chassis or remove power to replace or swap SAS drives. Proceed to the section below for instructions. You must use standard 3.5"...
  • Page 48 SSG-937R-E2CJB User's Manual Figure 5-4. Removing an HDD Carrier from the Chassis Release Button Caution: Enterprise level hard disk drives are recommended for use in Supermicro chassis and servers. For information on recommended HDDs, visit the Supermicro website at http://www.supermicro.com Caution: Except for short periods of time while swapping hard drives, do not operate the server without all hard drive carriers inserted.
  • Page 49 Chapter 5: Advanced Chassis Setup Figure 5-5. Removing the Dummy Drive from the Carrier Dummy Drive Drive Carrier Figure 5-6. Installing a Drive to a Carrier...

  • Page 50: Midplane

    SSG-937R-E2CJB User's Manual Midplane The midplane supplies power and logic to the hard drives as well as other parts of the system. See Figure 5-7 below for a list of connections to the midplane. Figure 5-7. Midplane Connections PRESS FIT...

  • Page 51: Power Supply

    Chapter 5: Advanced Chassis Setup Power Supply The SSG-937R-E2CJB has a 1200 watt redundant power supply consisting of two separate power modules. Each power supply module has an auto-switching capabil- ity, which enables it to automatically sense and operate at a 100-240V input voltage.
  • Page 52 SSG-937R-E2CJB User's Manual Notes 5-10...

  • Page 53: Appendix A System Specifications

    System Specifications Drive Bays Sixteen hot-swap drive bays to house 3.5" SAS drives Chassis SSG-937R-E2CJB (3U rackmount) Dimensions: (WxHxD) 17.2 x 5.2 x 25.5 in. (437 x 132 x 648 mm) Weight (Net): 56 lbs. (25.5 kg.) Weight Gross (Bare Bone): 75 lbs. (34 kg.)

  • Page 54: Regulatory Compliance

    (continued from front) The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency com- munication devices or other critical systems whose failure to perform be reasonably expected to result in significant injury or loss of life or catastrophic property damage.

Table of Contents