Tm Gauges; Active Trim (Optional); Trim Tabs (Optional) - Quicksilver 875SD Owner's Manual

Table of Contents

Quicksilver 875SD — System & Component Overview and Operation

screens depending on option selected), Vessel Link, diagnostic port, and a keypad. If equipped, all

equipment can be found at the main helm.

Refer to the manufacturer's manual for complete instructions, information and warranty.

16. SmartCraft

System Gauges

The instrument package on your boat includes a SmartCraft

gauge system. By pressing the "mode" button on the gauge, specific information vital to the safe

operation of the vessel can be displayed. Refer to your SmartCraft

specific information on how to get the most out of the multi-gauge display.

In addition, Quicksilver® offers an optional factory installed single or twin screen GPS along with

Mercury's Vessel Link system. If installed, the same engine data that you see on your SmartCraft

gauges can be displayed on your GPS. Refer to the GPS owner's manual for more specific information

regarding instructions and warranty.

Your boat may come equipped with the Active Trim system from Mercury. Active Trim automatically

adjusts the engine trim based on boat speed to optimize performance and fuel economy. The system

allows for the owner to either use the default system programmed, or create their own trim profile. At

anytime the user can override the automatic trim system by simply pressing the trim button on the

shifter.

The Active Trim keypad is located on the starboard side of the dash. Refer to the manufacturer's

manual for complete instructions and warranty.

Active Trim

The trim tabs are located within recesses in the hull at the transom and are used to level the boat

(port to starboard) caused by uneven weight distribution, too many people on one side of the vessel,

or by strong winds pushing the vessel to one side.

The trim tabs are controlled by switches located at the helm. LED indicators located on the switch

indicate the amount of trim tab deflection (one bar indicates the trim tabs are in the up position,

while all red bars indicate the trim tabs are fully deployed in the down position). To lower the port

bow (boat is running with a starboard list), push the left switch marked DOWN. Alternatively, to lower

the starboard bow (boat is running with a port list), push the right switch marked DOWN.

tachometer and speedometer multi-

gauge owner's manual for

On/resume button

Off button

Profile selection

Active trim keypad

Table of Contents