Tm Gauges; Active Trim (Optional) - Quicksilver 905WE Owner's Manual

Table of Contents

Quicksilver 905WE — System & Component Overview and Operation

Emergency Engine Shutdown Switch

15. SmartCraft

System Gauges

The instrument package on your boat includes a SmartCraft

gauge system. By pressing the "mode" button on the gauge, specific information vital to the safe

operation of the vessel can be displayed. Refer to your SmartCraft

specific information on how to get the most out of the multi-gauge display.

In addition, Quicksilver® offers an optional factory installed GPS along with Mercury's Vessel Link

system. If installed, the same engine data that you see on your SmartCraft

on your GPS. Refer to the GPS owner's manual for more specific information regarding instructions

and warranty.

Your boat may come equipped with the Active Trim system from Mercury. Active Trim automatically

adjusts the engine trim based on boat speed to optimize performance and fuel economy. The system

allows for the owner to either use the default system programmed, or create their own trim profile.

At anytime the user can override the automatic trim system by simply pressing the trim button on the

shifter.

The Active Trim keypad is located on the starboard side of the dash below the shifters. Refer to the

manufacturer's manual for complete instructions and warranty.

Active Trim

Ignition shutdown safety switch

Switch clip (attached to switch)

Lanyard

Switch clip (attached to operator)

Wear the lanyard at all times when operating the boat. Use

it to stop only in an emergency. DO NOT use it to shut off

the engine during normal operation

tachometer and speedometer multi-

gauge owner's manual for

gauges can be displayed

On/resume button

Off button

Profile selection

Active trim keypad

Table of Contents