Advertisement

Quick Links

455 Cabin Owner's Manual

Advertisement

Table of Contents
loading

Summary of Contents for Quicksilver 455 Cabin

  • Page 1 455 Cabin Owner’s Manual...
  • Page 3 Welcome Congratulations on becoming a new owner of a Quicksilver® boat. This Owner’s Packet will provide important information about the features of your boat and should be, at all times, kept aboard your boat. Take time to carefully review the information in this packet to really get to know your boat.
  • Page 4 Information in this publication is based upon the latest production specifications available at printing. Quicksilver® reserves the right to make changes at any time, without notice, in the colors, equipment, specifications, materials and prices of all models, or to discontinue models. Should changes in production models be made, Quicksilver®...
  • Page 5: Table Of Contents

    Table of Contents Introduction System & Component Overview and Operation 1. Owner’s Manual ..........vi 1. Fuel System ..........12 2. Your Responsibilities ........vi 2. Bilge Pump ........... 14 3. Safety / Warning Labels ........ vi 3. Fire Prevention ..........15 4.
  • Page 6: Introduction

    Introduction 1. Owner’s Manual The material here and the rest of the Owner’s manual packet: • Gives you basic safety information • Describes the fundamentals of boat use • Describes the features of your boat • Describes the equipment on your boat •...
  • Page 7: Dealer Responsibilities

    The CIN consists of a two digit country code indicating the country of origin of the manufacturer and a unique twelve digit code that provides Quicksilver® vital information about your boat. The CIN must be included in all correspondence related to the vessel.
  • Page 8 This Limited Warranty does not apply to any Quicksilver® which has been salvaged or declared a total loss or a constructive total loss for any reasons not covered in this Limited Warranty. This Limited Warranty also does not apply to the following items: 1.
  • Page 9 Limited Warranties stated. To the extent allowed by law neither Brunswick Marine in EMEA, not the selling dealer shall have any responsibility of the loss of use of the Quicksilver®, loss of time, inconvenience, commercial loss or consequential damages.
  • Page 10 Limited Warranty, and the owner must notify Brunswick Marine in EMEA of any Quicksilver® being repaired by an authorized Brunswick Marine in EMEA dealer which has been at the dealership for fifteen (15) days, or of any claimed defect which was not corrected after one (1) repair attempt.
  • Page 11 Limited Warranties stated. To the extent allowed by law neither Brunswick Marine in EMEA, not the selling dealer shall have any responsibility of the loss of use of the Quicksilver®, loss of...
  • Page 12 Limited Warranty, and the owner must notify Brunswick Marine in EMEA of any Quicksilver® being repaired by an authorized Brunswick Marine in EMEA dealer which has been at the dealership for fifteen (15) days, or of any claimed defect which was not corrected after one (1) repair attempt.
  • Page 13: Basic Boat Dimensions & Specifications

    Quicksilver 455CAB — General Information 1. Basic Boat Dimensions & Specifications Manufacturer: Brunswick Marine in EMEA Model: Quicksilver Activ 455 Cabin Design Category: Draft Max (T 0.71m Length of Hull (L 4.30m Overall Height (H 1.63m Length Overall (L 4.50m...
  • Page 14: Vessel Stability

    Quicksilver 455CAB — General Information 2. Vessel Stability The following maximum load has been used for assessing the stability and buoyancy comprising • Manufacturer’s maximum recommended load per ISO 14946 405 kg This assessment has been made assuming that •...
  • Page 15: Passenger Locations

    Quicksilver 455CAB — General Information 4. Passenger Locations Be aware of your footing while the boat is underway. Gelcoat surfaces are slippery when wet. Use extreme Slipping or falling could result in serious injury or death, caution when walking on wet surfaces.
  • Page 16: Safety Label Locations

    Quicksilver 455CAB — General Information 6. Safety Label Locations...
  • Page 17: Deck/Cockpit Layout (Standard Equipment)

    Quicksilver 455CAB — General Information 7. Deck/Cockpit Layout (Standard Boat) Navigation light (P&S) Bow cleat (P&S) Bow rail (P&S) Port deck trail Cabin door Grab rail Center cockpit floor hatch Rod holder (P&S) Aft seat handhold (P&S) Cockpit table Stern cleat (P&S) Port aft seat Stern eye (P&S)
  • Page 18: Deck/Cockpit Layout (Optional Equipment)

    Quicksilver 455CAB — General Information 8. Deck/Cockpit Layout (Optional Equipment) Copilot seat Back bench filler seat Bimini w/ enclosure (not shown) Mooring cover (not shown) 9. Cockpit Storage Cockpit floor storage Port cockpit seat storage tub Do not store any equipment containing petrol (outboard engines, portable petrol tanks, etc.) in the cockpit seat...
  • Page 19: Thru Hull Locations

    Quicksilver 455CAB — General Information 10. Thru Hull Locations Port cockpit drain Bilge pump drain Starboard cockpit drain Anchor locker drain Motorwell drains Cockpit hatch gutter drain Garboard drain plug Depending on the type of boat, you may have underwater The deck drains provide self-bailing capabilities while the fittings that need drain plugs.
  • Page 20: Cabin Layout

    Quicksilver 455CAB — General Information 11. Cabin Layout Navigation light storage CO monitor Port mattress Cockpit table storage Forward mattress Filler board (optional) Starboard mattress Filler cushion (optional) 12. Dash Layout Steering wheel GPS (optional) Tachometer Engine trim gauge Speedometer...
  • Page 21: Navigation Lights

    Quicksilver 455CAB — General Information Please note that operator vision from the helm may be obstructed by high trim angles of the craft, along with other factors such as outboard engine trim angles, hull trim plane angles, loading and load distribution, speed &...
  • Page 22: Engines

    Operator’s Manual. Refer to the Engine Owner’s Manual for operating instructions and warranty information. The engines are warranted directly by Mercury, not by Quicksilver®. 15. Trailering Quicksilver® does not offer a trailer for this boat, however, if you plan on purchasing one from another vendor, please consider the following: •...
  • Page 23: Strong Points

    The bow and stern eyes may be used for short term lifting of the boat only. Towing Quicksilver® does not recommend towing other boats, or being towed by other boats, unless it is absolutely necessary. In the event that it becomes necessary for you to have your boat towed, a professional company experienced in this type of operation is better equipped to handle this situation.
  • Page 24: Fuel System

    Quicksilver 455CAB — System & Component Overview and Operation 1. Fuel System Your boat’s petrol fuel system consists of a portable fuel tank located in the bilge. Access to the tank is via the center cockpit floor hatch. Straps are used to secure the tank to the fuel tank floor. On the portable tank itself is a quick-disconnect fitting that allows you to easily remove the fuel distribution line to the engine.
  • Page 25 Your boat was manufactured, and shipped from the factory with ethanol compatible materials. Before introducing petrol with ethanol into your fuel tank, ask your dealer if any components have been added or replaced that are not recommended by Quicksilver, Mercury or may not be ethanol- compatible.
  • Page 26: Bilge Pump

    Quicksilver 455CAB — System & Component Overview and Operation Storage Long periods of storage and/or non-use, common to boats, create unique problems. When preparing to store a boat for extended periods, disconnect the fuel line. Most portable fuel tanks have closable vents.
  • Page 27: Fire Prevention

    Quicksilver 455CAB — System & Component Overview and Operation 1. Remove the motor module to see if the impeller rotates with the power on. 2. Remove any debris that may have accumulated in the nozzle section or strainer base. 3. Check hose and connection on hull side for debris and proper connections.
  • Page 28: Carbon Monoxide Monitor

    4. Carbon Monoxide Monitor Quicksilver® boats are equipped with carbon monoxide (CO) monitors in the cabin and enclosed berths or staterooms. Carbon Monoxide is an odorless, colorless, and tasteless, extremely toxic gas produced by engines, heaters, stoves or generators. When inhaled it combines with hemoglobin in the blood, preventing absorption of oxygen and is unlikely to be noticed until the person is overcome.
  • Page 29 Quicksilver 455CAB — System & Component Overview and Operation • Make sure that at all times, there is good ventilation throughout the boat. Open all hatches, portlights, or canvas openings to let fresh air circulate. • Never operate the boat with the canvas enclosure unless there is ventilation throughout the boat (i.e.
  • Page 30: Steering

    Quicksilver 455CAB — System & Component Overview and Operation End of Life Signal Your CO detector is equipped with an End Of Life (EOL) signal indicating the sensor used in the unit has reached the end of its service life and must be replaced. The detector contains an electro- chemical sensor that will last approximately 7 years.
  • Page 31: Engine Control

    Quicksilver 455CAB — System & Component Overview and Operation Mechanical Steering Steering wheel Rotary helm Steering cable If adjustment is necessary: 1. Loosen the bolt on the trim tab. 2. If the boat turns easier to the right, move the trailing edge of the trim tab to the right. If the boat turns easier to the left, move the trailing edge of the trim tab to the left.
  • Page 32: Emergency Engine Shutdown Switch

    Quicksilver 455CAB — System & Component Overview and Operation Power Trim & Tilt The power trim, located on the side of the gear shift throttle handle, allows you to raise and lower the engine for trailering and launching the boat. It also allows you to adjust the engine to create the optimum run angle for the boat to achieve best all around performance (fuel consumption, speed).
  • Page 33: Cockpit Table

    Quicksilver 455CAB — System & Component Overview and Operation 8. Cockpit Table On your boat, a cockpit table is available for entertaining. This table and table leg are removable and can be stored in brackets inside the forward cabin area. To install the table, first remove the plastic cover located in the table base plate.
  • Page 34: Canvas (Optional)

    Quicksilver 455CAB — System & Component Overview and Operation Back Bench Filler Seat Back bench filler seat Upper handle bar Back Bench Filler Seat in “lounge” position Back Bench Filler Seat rotated forward Before trimming the engine to trailer mode, make sure that the back bench filler is rotated forward.
  • Page 35 Quicksilver 455CAB — System & Component Overview and Operation Canvas Bimini Enclosure panels Bimini Bimini with enclosure...
  • Page 36: Dc Electrical System

    The DC electrical system is powered by a single battery, and is kept charged by the engine driven alternator. 2. Battery Quicksilver® recommends AGM type starting or a deep cycle battery for you boat. The battery must meet the minimum capacity required by the engine manufacturer. Refer to your engine owner’s manual for exact battery requirements.
  • Page 37: Fuses And Breakers

    Quicksilver 455CAB — Electrical Systems 5. Fuses and Breakers Your boat will either have fuses or breakers protecting the DC electrical system. If you have to replace a fuse or electrical breaker, replace only with a fuse or breaker of the same rating. The amperage will be marked on the fuse or breaker, and it is recommended that you carry spare fuses or breakers.
  • Page 38: Electrical Schematics

    These electrical schematics were generated by the Electrical Engineering Department for technical reference and service technicians. Quicksilver® does not recommend that you attempt to work on the boat’s electrical system yourself. Instead, we recommend that you take your boat to your local authorized Quicksilver®...
  • Page 39 Quicksilver 455CAB — Electrical Systems DC Wiring Schematic...
  • Page 40: Maintenance

    If the growth is more severe, you may need to enlist the services of a professional hull cleaning company. Check with your Quicksilver® dealer for recommendations on a compatible rubbing compound for your boat or a professional hull cleaning company in your area.
  • Page 41: Component Maintenance

    Frequent routine cleaning of your stainless steel will help maintain the finish. Quicksilver® recommends that you wash stainless steel components with mild soap and cold or lukewarm water after every use of the boat. If added protection is necessary, apply a cleaning wax.
  • Page 42 Do not store any of the canvas pieces while wet. The effects of ultraviolet light can sometimes be reduced by chemical treatment of canvas items. Consult your Quicksilver® dealer or check your canvas manufacturer’s manual before using any chemical treatments on your canvas.
  • Page 43 Quicksilver 455CAB — Maintenance Dry the window with a soft cloth or chamois to prevent water spots. Polish with a separate cloth. Don’t leave cleaners on for long periods; immediately wash the window. Finally, don’t apply cleaners in direct sunlight or at elevated temperatures.
  • Page 44 Quicksilver 455CAB — Maintenance THIS PAGE INTENTIONALLY LEFT BLANK...
  • Page 45 OWNER’S MANUAL RECEIPT Please fill out the following form, sign it, and give it to the dealer in order to ensure full warranty coverage: Name: _______________________________________________________ Address: _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ Certify that I have received the Owner’s Manual for the following boat: Brand: __Quicksilver ________ Model:...

Table of Contents