Thru Hull Locations - Quicksilver 875SD Owner's Manual

Quicksilver 875SD — General Information

12. Thru Hull Locations

Cockpit drain
Vent box drain
Greywater pumpout
Fuel tank vent
Water tank vent
Greywater tank vent
Air conditioner drain pan
Air conditioner discharge
Diesel heat exhaust
Thruster battery vent
Anchor locker drain
Depending on the type of boat, you may have underwater
fittings that need drain plugs. Garboard drain plugs need to
be in place before the boat goes in to the water. Any fitting
that will be underwater needs to be plugged or the seacock
needs to be closed.
Head sink drain
Toilet water pickup
Shower sump drain
Bilge pump drain
Helm floor drain
Entertainment center drain
Air conditioner water pickup
LPG storage vent
Waste vent
Waste pumpout
Motorwell drain
The deck drains provide self-bailing capabilities while the
boat is static in the water and no passengers on board. This
12
prevents accumulation of water in the cockpit.