Smartcraft Tm Gauges; Active Trim (Optional) - Quicksilver 855WE Owner's Manual

Quicksilver 855WE — System & Component Overview and Operation
Emergency Engine Shutdown Switch
TM
15. SmartCraft System Gauges
The instrument package on your boat includes a SmartCraft
gauge system. By pressing the "mode" button on the gauge, specific information vital to the safe
operation of the vessel can be displayed. Refer to your SmartCraft
specific information on how to get the most out of the multi-gauge display.
In addition, Quicksilver® offers an optional factory installed single or twin screen GPS along with
Mercury's Vessel Link system. If installed, the same engine data that you see on your SmartCraft
gauges can be displayed on your GPS. Refer to the GPS owner's manual for more specific information
regarding instructions and warranty.

16. Active Trim (optional)

Your boat may come equipped with the Active Trim system from Mercury. Active Trim automatically
adjusts the engine trim based on boat speed to optimize performance and fuel economy. The system
allows for the owner to either use the default system programmed, or create their own trim profile.
At anytime the user can override the automatic trim system by simply pressing the trim button on the
shifter.
The Active Trim keypad is located on the starboard side of the dash below the shifters. Refer to the
manufacturer's manual for complete instructions and warranty.
Active Trim
Ignition shutdown safety switch
Switch clip (attached to switch)
Lanyard
Switch clip (attached to operator)
Wear the lanyard at all times when operating the boat. Use
it to stop only in an emergency. DO NOT use it to shut off
the engine during normal operation
TM
tachometer and speedometer multi-
TM
gauge owner's manual for
41
TM
On/resume button
Off button
Profile selection
Active trim keypad