Smartcraft System Gauges; Active Trim - Quicksilver Activ 675 Sundeck Owner's Manual

Quicksilver 675SD — System & Component Overview and Operation
boat leaves the control station, either accidently by falling into the boat, or by being ejected
overboard.
The lanyard should be long enough to prevent inadvertent activation. Do not let the lanyard become
entangled.
Emergency Engine Shutdown Switch
TM
10. SmartCraft System Gauges
The instrument package on your boat includes a SmartCraftTM tachometer and speedometer multi-
gauge system. By pressing the "mode" button on the gauge, specific information vital to the safe
operation of the vessel can be displayed. Refer to your SmartCraftTM gauge owner's manual for
specific information on how to get the most out of the multi-gauge display.
In addition, Quicksilver® offers an optional factory installed GPS along with Mercury's Vessel Link
system. If both are installed, the same engine data that you see on your SmartCraftTM gauges can be
displayed on your GPS. Refer to the GPS owner's manual for more specific information regarding
instructions and warranty.
11. Active Trim (optional)
Your boat may come equipped with the Active Trim system from Mercury. Active Trim automatically
adjusts the engine trim based on boat speed to optimize performance and fuel economy. The system
allows for the owner to either use the default system programmed, or create their own trim profile.
At anytime the user can override the automatic trim system by simply pressing the trim button on
the shifter.
The Active Trim keypad is located on the starboard side of the dash. Refer to the manufacturer's
manual for complete instructions and warranty.
Wear the lanyard at all times when operating the boat. Use
it to stop only in an emergency. DO NOT use it to shut off
the engine during normal operation
Engine shutdown safety switch
Switch clip (attached to switch)
Lanyard
Switch clip (attached to operator)
23