Smartcraft® Gauges; Active Trim (Optional); Zipwake Interceptors (Optional) - Quicksilver 675CR Owner's Manual

Table of Contents

Quicksilver 675CR— System & Component Overview and Operation

11. SmartCraft® System Gauges

The instrument package on your boat includes a SmartCraft® tachometer and speedometer multi-

gauge system. By pressing the "mode" button on the gauge, specific information vital to the safe

operation of the vessel can be displayed. Refer to your SmartCraft® gauge owner's manual for specific

information on how to get the most out of the multi-gauge display.

Your boat may come equipped with the Active Trim system from Mercury. Active Trim automatically

adjusts the engine trim based on boat speed to optimize performance and fuel economy. The system

allows for the owner to either use the default system programmed, or create their own trim profile.

At anytime the user can override the automatic trim system by simply pressing the trim button on the

shifter.

The Active Trim keypad is located on the port side of the dash. Refer to the manufacturer's manual for

complete instructions and warranty.

Active Trim

Zipwake is a dynamic trim control system that allows the operator to have either an automatic or

manual pitch and roll control of the boat. Located on the hull at the transom, there are two

interceptors which level the boat (port to starboard) caused by uneven weight distribution, too many

people on one side of the vessel, or by strong winds pushing the vessel to one side.

The interceptors are controlled by panel located at the helm. In auto mode, the system decides how

far the interceptors should be deployed depending on boat speed and attitude. Located on the control

panel, there are two control wheels that allow you to manually control the interceptors. To lower the

bow, simply rotate the pitch wheel forward, and to raise the bow, rotate the pitch wheel down. To

correct a port list, rotate the roll wheel clockwise, while to correct a starboard list, rotate the roll

wheel counterclockwise.

Refer to the manufacturer's manual for complete instructions and warranty.

On/resume button

Off button

Profile selection

Active trim keypad

Table of Contents