Steering - Quicksilver 875SD Owner's Manual

Quicksilver 875SD — System & Component Overview and Operation
To move the bow to the port direction push the left button. To move the bow to the starboard
direction, push the right button. To turn off the bow thruster controls, press the on/off switch once.
Refer to the thruster owner's manual for complete details on the operation and warranty information.
Bow Thruster
Bow Thruster Movement

12. Steering

Your boat comes equipped with a hydraulic steering system. The basic system for a single engine boat
contains a steering wheel, a hydraulic helm pump, a hydraulic steering cylinder, and hydraulic hoses. If
you purchase a Mercury Verado® six cylinder engine, the steering system includes an electric power
assisted steering pump to aid in the handling of the vessel.
Do NOT test the bow thruster while the boat is out of the
water, unless you are certain that everyone is a safe
distance from the thrust tube.
Never allow the bow thruster to run for longer than 5
seconds with the boat is out of the water.
If 2 control panels are installed at separate helms, never
operate the bow thruster from both panels simultaneously.
Refer to the bow thruster owner's manual for exact battery
36
Thruster
150A fuse
Battery
Battery switch
VSR
Control panel
requirements