1. INTRODUCTION The aim of this manual is to give guidance to owners about how to safely drive and make the most of this craft. This manual contains detailed information about the craft, standard and optional equipments and instructions about the use and maintenance of the craft. Before using your craft, please read carefully this manual to become familiar with it.
CAUTION Never use gasoline station air pumps or any other high pressure pump. Pressure rises with the increase in temperature: 1°C increase in temperature means a 3 millibars increase in pressure. Therefore, the pressure will decrease once the craft is in the water or at night, and will increase when the craft is warmed by excessive exposure to the sun.
3.2 PADDLES Paddles, when not in use, can be secured on the inner sides of the craft with the specific attachments provided for this purpose. 4. FITTING FIBERGLASS SEAT It is advisable to fit the seat before finishing the inflation of the tubes to the maximum pressure.
6. MOUNTING ENGINE First of all, consult your engine manual and follow the instructions on mounting. • Place the engine on the transom, well centred, on the bow-stern axis of thecraft. • For the best outboard engine performance, it is essential to position it at thecorrect transom height.
• With a pencil draw round the accessory and mark drilled holes on the deck, removing the accessory once outlined. • Stick painter adhesive tape around the external line of the accessory to protect the rest of the deck. 7.2 DRILLING OF DECK •...
• Periodically clean and dry the box of the battery, lubricating the terminals. • It is advisable to use a battery switch as a safety element, to avoid accidental discharges and other electrical risks. • To dismount the battery, first disconnect all electrical systems, especially the battery switch. Then first disconnect the ground terminal (-) and then the positive (+).
11. NAVIGATION 11.1 USING OARS OR PADDLES Although Quicksilver craft have been designed to use an engine, they can also be handled with oars or paddles for mooring, anchoring or beaching. To row your craft correctly, paddle constantly with short quick strokes, which will allow you to maintain headway.
12. DAVITS If your craft is fitted with davit lifting points, we recommend the following: • Check with your boat dealer that the davit system on your boat is suitable to take your inflatable craft. • Do not lift the craft if it is swamped or with people aboard.
23°C in a dry room in the shade. Small repairs and punctures can be easily repaired with the materials in the repair kit. Difficult repairs (tears, rips near seams, etc.) must be repaired by an Official Quicksilver Service or specialized shop.
4. Clean the area to be repaired with alcohol, leaving it to dry for 5 minutes and cut out a patch or strip about 5 cm larger than the damaged area. 5. Difficult repairs (tears, rips near seams, ect) must be repaired by Quicksilver Service or specialized shop.
17. ENVIRONMENTAL CONSIDERATIONS As a boater, you already appreciate nature's beauty and the peace of the great outdoors. It is a boater's responsibility to protect the natural environment by keeping waterways clean. Don't put anything in the water that you wouldn't eat or drink! FUEL AND OIL SPILLAGE The spilling of fuel or oil into our waterways contaminates the environment and is dangerous to wildlife.
The guarantee, as described in this certificate, will only be valid once the enclosed "Registration Card" has been returned to BME, duly filled in, within 30 days of the date of purchase. 18.2 COVERAGE Quicksilver craft used solely for recreational purposes, are guaranteed as of the date of purchase and for a period of: •...
Page 15
10. The craft is sold by the original buyer to a third party. 18.4 PROCEDURE To make use of this guarantee, the owner will contact the nearest official Quicksilver distributor, who will give instructions as to where to send the craft.