Cable Management - StarTech.com ARMDUAL Manual

Cable management

Note: When you attach the cables and route them through the cable management
channels, ensure that you leave enough slack to avoid stretching or pulling out the
cables when you move the arm.
1. Connect your cables to your displays and position the mounting arm in its fully
extended position to ensure that the cables you are using are long enough to allow
for proper movement.
2. Remove the cable covers from the undersides of the LCD arms (1).
3. Run the cables down the LCD arms, leaving enough slack at the arm joints. Reattach
the cable covers you removed in step 2.
4. While holding the cables against the pole, snap the cable clips (12) over the cables
and onto the pole.
Instruction Manual
10