Christie LWU720i User Manual page 113

Issue: Cannot control the external device by using Network Bridge.
Item to be checked
Is Network Bridge settings
enabled?
Is STANDBY MODE set to
POWER SAVE?
Are the serial settings set
correctly?
LWU720i/LHD720i/LWU620i
User's Manual - Network Guide
Solutions
Check the settings in OPTION – SERVICE
– COMMUNICATION – COMMUNICATION
TYPE menu.
The Network Bridge is not available when
STANDBY MODE is set to POWER SAVE.
Set STANDBY MODE to NORMAL, and set
NETWORK BRIDGE (WIRELESS/WIRED) in
the COMMUNICATION TYPE menu.
Check the serial settings of the projector and
the external device.
111
9. Troubleshooting
020-001293-01 Rev. 1 (10-2017)