Christie LWU720i User Manual page 26

2. Connection to the network
Item
SSID SCAN
WIRELESS
LIST
SETUP
(continued)
(continued)
(continued on next page)
LWU720i/LHD720i/LWU620i
User's Manual - Network Guide
Description
(3) The OSD below is displayed while the
connection is in progress.
The keys other than RESET button are not
available while the connection is in progress.
The connection process is interrupted when
pressing the RESET button.
The OSD below is displayed when the connection
process is complete.
The message below is displayed when the
connection is not established correctly.
NOTE
･ Encryption settings cannot be
changed when encryption lock is enabled
in Network Settings – Wireless Setup in
Projector Web Control. Refer to Encryption
Lock. (&42)
• Open System Authentication is used for WEP
encryption, and Shared Key Authentication
is not supported. The authentication with
an access point succeeds and it appears
that the connection is established normally
when entering illegal encryption key due to
Open System Authentication, but data cannot
actually be transmitted.
(4) The icon indicating the connection status
( ) is displayed in SSID SCAN LIST when the
connection is complete.
24
： Connection succeeded
： Connection failed
： Encryption Lock enabled
020-001293-01 Rev. 1 (10-2017)