Christie LWU720i User Manual page 95

Setup the following functions through WEB browser, to manage the projector by
SNMP.
Port Settings (&46)
1) Select [Port Settings] on main menu in Projector Web Control.
2) Click the [Download MIB file] to download a MIB file.
3) Click the [Enable] checkbox to open the SNMP Port. Set the address to send
the SNMP trap to when a Failure/Warning occurs.
Security Settings (&58)
1) Select [Security Settings] on main menu in Projector Web Control.
2) Click the [SNMP] and set the community name on the displayed screen.
Alert Settings (&50)
Configure the settings for Trap transmission of Failures/Warnings.
1) Select [Alert Settings] on main menu in Projector Web Control.
2) Select the Failure/Warning item to be configured.
3) Click the [Enable] checkbox to send out the SNMP trap for Failures/Warnings.
Clear the [Enable] checkbox when SNMP trap transmission is not required.
4) Click the [Apply] button to save the settings.
NOTE
• Register the downloaded MIB file to SNMP manager program to be used.
• Be sure to execute Network Restart when the settings of [Port Settings] or
[Security Settings] is changed.
LWU720i/LHD720i/LWU620i
User's Manual - Network Guide
93
8. Other Functions
020-001293-01 Rev. 1 (10-2017)