Full-Duplex - Christie LWU720i User Manual

7. Network Bridge Function
7.4 Transmission method (continued)
NOTE
• With using the HALF-DUPLEX method, the projector can send out
254 byte data at the maximum at a time.
• If it is not required to monitor the response data from an external device and
the RESPONSE LIMIT TIME is set to OFF, the projector can receive the data
from the computer and send it out to an external device continuously.
The OFF is selected as the default setting.

7.4.2 FULL-DUPLEX

This method lets the projector make two way communication, transmitting and
receiving data at the same time, without monitoring response data from an
external device.
With using this method, the computer and an external device send the data out of
synchronization. If synchronization is required, set the computer to synchronize.
NOTE
• When the computer controls the synchronization of receptions and
transmissions, the external device may not be controlled properly depending on
the status of data processing of the projector.
LWU720i/LHD720i/LWU620i
User's Manual - Network Guide
88
020-001293-01 Rev. 1 (10-2017)