3. Web Control
3.2 Crestron e-Control
The Main window as shown above is
displayed at first. However, if you have
enabled User Password on the Tools window
(&72), a dialog prompting you to enter the
password as shown on the right is displayed,
and no operation is enabled until you have
entered the password. After entering the
preset password, the dialog disappears and
the Main window is displayed.
As shown below, you can open a window by
clicking the corresponding tab at the top right
of the window.
Tab
Logout
Tools
Info
Contact IT Help
LWU720i/LHD720i/LWU620i
User's Manual - Network Guide
®
Logs out from e-Control
This tab appears only when User Password of the Tools window is
enabled.
Opens Tools window. (&72)
Opens Info window. (&74)
Opens Help Desk window. (&75)
User Password dialog
Description
®
.
68
Tab
020-001293-01 Rev. 1 (10-2017)