8. Other Functions
The following procedure sets the schedule in Projector Web Control.
Setting the program is necessary to use the schedule function. Various events
such as power on/off or switching input source, and the time to execute the events
must be registered in the program. No events are registered in program 1 – 16
with factory default settings. Set the program following the steps below.
In the case that the program has already been set, skip to step 6).
1) Select [Schedule Settings] on main menu in Projector Web Control.
2) Select the program number in list under Program List and click the [Program
Edit] button to display the following program edit display. The display for editing
Program-1 is shown below.
3) After setting the time, events and parameters, click the [Register] to add the
new event.
Click the [Delete] button to delete an event.
Click the [Delete All] button to delete all the events in the currently selected
program.
LWU720i/LHD720i/LWU620i
95
User's Manual - Network Guide
020-001293-01 Rev. 1 (10-2017)