Configuration Of Approved Media (When Using Adjustable Sensor) - Citizen CLP-7202e User Manual

Chapter 3 Media and Ribbon

3 Configuration of Approved Media (When Using Adjustable Sensor)

3 Configuration of Approved Media
(When Using Adjustable Sensor)
The adjustable sensor is the standard for CLP-7201e but it is the optional for CLP-7202e.
Make sure that the adjustable sensor is set to 'AJSensON.' (See Chapter 2.)
A
B
C
D
E
F
G
H
I
J
K
L
M
N
Note:
Size of media
Printable area
Label width
Liner width
Left end of label
Gap between labels
Label length
Label pitch
Liner thickness
Media thickness
Right end of notch
Left end of notch
Notch length
Right end of black mark
Left end of black mark
Black mark width
• Media having both gaps between labels and black marks should use the media gap sensor.
• Fanfold media should use the media gap sensor.
Labels
Label
Label
Label
Use of media gap
sensor
2.5mm
Left margin
Minimum value mm (in)
25.24 (1.0)
25.24 (1.0)
0
2.54 (0.10)
12.70 (0.50)
12.70 (0.50)
0.05 (0.0025)
0.05 (0.0025)
3.6 (0.14)
0
2.54 (0.10)
15.00 (0.59)
0
3.18 (0.125)
Continuous media
Notch detection
Use of media gap
sensor
Direction of media feed
104.0mm (11.5mm)
Printable area Right
40
Maximum value mm (in)
118.00 (4.65)
118.00 (4.65)
2.54 (0.10)
2539.00 (99.96)
2539.00 (99.96)
2539.00 (99.96)
0.125 (0.0049)
0.25 (0.01)
60.8 (2.39)
57.2 (2.25)
17.80 (0.70)
66.5 (2.62)
51.5 (2.02)
17.80 (0.70)
Black mark
Printable
area
Black mark
OD value: 1.5 or
more
Carbon black ink
Use of black mark
sensor