Configuration Of Approved Media (When Using Front Sensors) - Citizen CLP-7202e User Manual

2 Configuration of Approved Media
(When Using Front Sensors)
The front sensors consist of the transparent and reflective type photosensors that detect the
position of the labels or tags:
Transparent type photosensor:
Reflective type photosensor:
Note: Make sure that the adjustable sensor is set to 'AJSensOF.' (See Chapter 2.)
• Dimensions of media
For gaps between labels, notches of tags (labels) and black marks, see the size of media below.
A Label width
B Liner width
C Left end of label
D Gap between labels
E Label length
F Label pitch
G Liner thickness
H Media thickness
I Right end of notch
J Left end of notch
K Notch length
L Right end of black mark
M Left end of black mark
N Black mark width
• Media having both gaps between labels and black marks should use the media gap sensor.
Note:
• Fanfold media must should use the media gap sensor.
Size of media
Printable area

2 Configuration of Approved Media (When Using Front Sensors)

Detects gaps between labels and notches of tags.
Detects black marks.
Minimum value mm (in)
7.62
25.40
0
2.54
2.54
5.08
0.06
0.06
8.3
0
2.54
15.00
0
3.18
Labels
Notch detection
Label
Label
Label
Use of media gap Use of media gap
sensor sensor
2.5mm 104.0mm
Left margin Printable area
39
Maximum value mm (in)
(0.3) 118.00
(1.0) 118.00
2.54
(0.10) 2539.00
(0.10) 2539.00
(0.20) 2539.00
(0.0025) 0.125
(0.0025) 0.25
(0.32) 11
4.7
(0.10) 17.80

(0.59)
1.5
(0.125) 17.80
Continuous media
Black mark
Printable
area
Black mark
OD value: 1.5 or
more
Carbon black ink
Use of black mark
sensor
Direction of media feed
(11.5mm)
Right
Chapter 3 Media and Ribbon
(4.65)
(4.65)
(0.10)
(99.96)
(99.96)
(99.96)
(0.0049)
(0.01)
(0.43)
(0.19)
(0.70)
(0.06)
(0.70)