Citizen CLP-7202e User Manual page 18

Chapter 1 Setup
2 Part Names and Functions
Side view
(1) Adjust-screw
To change the ribbon tension setting on
the winding side. (See Chapter 4.)
(2) Rear tension knob
To change the ribbon tension setting on
the feeding side. (See Chapter 4.)
Rear view
(1) Serial interface connector
To connect the serial interface cable.
(2) USB interface connector
To connect the USB interface cable.
(3) Parallel interface connector
To connect the parallel interface cable.
(4) Power switch
To turn on or off the power.
(See Chapter 2.)
(5) Power inlet
To connect the power cord.
(6) PCMCIA memory card cover
To protect the PCMCIA memory card
from exposure to dust and foreign matter.
To install a PCMCIA memory card, first
unhook this cover, then slide it out. (See
Appendixes.)
２
2
6
3
16
１
1
4
5